Question about USB > Ethernet Adapter

Discuss the development of software, tools, libraries and anything else that helps make ps2dev happen.

Moderators: cheriff, Herben

Post Reply
jaymacdonald
Posts: 22
Joined: Sat Feb 24, 2007 7:20 am

Question about USB > Ethernet Adapter

Post by jaymacdonald »

Will such USB to Ethernet Adapters (like http://www.amazon.co.uk/Thrustmaster-US ... 894&sr=1-1) work for such tasks as ps2link? Or just for online gaming?
Also, do USB to IDE adapters work?

Thanks,
Jay
User avatar
Lukasz
Posts: 248
Joined: Mon Jan 19, 2004 8:37 pm
Location: Denmark
Contact:

Post by Lukasz »

Unless there is a driver for the USB devices, it wont work. To my knowledge there is only support for USB keyboard and mouse in the PS2SDK.
deba5er
Posts: 166
Joined: Mon Feb 04, 2008 2:01 pm

Post by deba5er »

I don't believe the USB to ethernet adapter will work on the PS2 for ps2link as I am unaware of any PS2 drivers (irx) for this. Go-Net is a USB-to-ethernet product which supposedly works for some games though. However, I have used a cheap USB to IDE cable successfully to connect a hard drive to the PS2 for use by ULE and other programs (the usbd.irx in ULE and other programs is compatible, and as long as the drive is FAT32 formatted, it works the same as a flash drive).

I would recommend spending your money on a PS2 network adapter if you can, as the network is faster than the USB 1.1 interfaces on the PS2. PS2 network adapters are still available (on ebay $20-40 US), many are available.
Post Reply