Page 1 of 1
PS2 Version 7 RXD VIA
Posted: Sat Jan 08, 2005 11:44 am
by Derek8588
Can anyone that has successfully installed the cable on there v7 ps2 and the RXD data part works, please PM me and i have a photo i got from DMS3 install diagram. It shows the area of where the possible correct vias are, which i have circled n blue. All you would need to do is point out the correct RXD via. Please help. I dont have a fully functional v4 ps2, so i installed the wires on a v7. Except for the RXD of course, which is where i need help.Thanks
Posted: Sat Jan 08, 2005 5:56 pm
by Drakonite
Instead of PMing keep it on the boards to help the others as well. If you provide me with a good enough photo of the area I should be able to point out the RXD via.
Pictures of V7 connections
Posted: Thu Oct 27, 2005 5:06 pm
by Dragoncracker
I installed the serial cable to my ps2 V7 a couple of days ago and tested it to check for the usuaml boot-up messages and it worked fine though i have to get a cable for it now because my port is attached to the ps2 case now. I took some poor pictures and did my best with them as well as included a modchip installation picture which i edited to show the connection points these pictures can be found/downloaded/and linked to at teh following addresses
http://www.geocities.com/adam007bond/ps2serial001.jpg
http://www.geocities.com/adam007bond/ps2serial002.jpg
http://www.geocities.com/adam007bond/stolentop.jpg
I hope these help someone install the EE_sio port on their ps2 V7 board, so please enjoy.
Also If anyone believes these to be wrong please let me know as I don't have the money to get a straight through Serial cable at the time.
Thank You for your time and patience,
Dragoncracker
