The first working ps3toolchain release!

kid101skater · Post by **kid101skater** » Thu Jun 21, 2007 1:57 am

IM STILL GETTING THIS


../../binutils/bin2c.c&#58; In function `main'&#58; 
../../binutils/bin2c.c&#58;89&#58; warning&#58; implicit declaration of function `_fileno' 
../../binutils/bin2c.c&#58;89&#58; warning&#58; implicit declaration of function `_setmode' 
make&#91;4&#93;&#58; *** &#91;bin2c.exe&#93; Error 1 
make&#91;4&#93;&#58; Leaving directory `/home/kevin/ps3toolchain/build/binutils-2.17.50/buil 
d-spu/binutils' 
make&#91;3&#93;&#58; *** &#91;all-recursive&#93; Error 1 
make&#91;3&#93;&#58; Leaving directory `/home/kevin/ps3toolchain/build/binutils-2.17.50/buil 
d-spu/binutils' 
make&#91;2&#93;&#58; *** &#91;all&#93; Error 2 
make&#91;2&#93;&#58; Leaving directory `/home/kevin/ps3toolchain/build/binutils-2.17.50/buil 
d-spu/binutils' 
make&#91;1&#93;&#58; *** &#91;all-binutils&#93; Error 2 
make&#91;1&#93;&#58; *** Waiting for unfinished jobs.... 
gcc -DHAVE_CONFIG_H -I. -I../../gas -I. -D_GNU_SOURCE -I. -I../../gas -I../bfd - 
I../../gas/config -I../../gas/../include -I../../gas/.. -I../../gas/../bfd -DLOC 
ALEDIR="\"/usr/local/ps3dev/spu/share/locale\""   -W -Wall -Wstrict-prototypes - 
Wmissing-prototypes -Werror -g -O2 -c ../../gas/write.c 
gcc -DHAVE_CONFIG_H -I. -I../../gas -I. -D_GNU_SOURCE -I. -I../../gas -I../bfd - 
I../../gas/config -I../../gas/../include -I../../gas/.. -I../../gas/../bfd -DLOC 
ALEDIR="\"/usr/local/ps3dev/spu/share/locale\""   -W -Wall -Wstrict-prototypes - 
Wmissing-prototypes -Werror -g -O2 -c ../../gas/config/tc-spu.c 
gcc -DHAVE_CONFIG_H -I. -I../../gas -I. -D_GNU_SOURCE -I. -I../../gas -I../bfd - 
I../../gas/config -I../../gas/../include -I../../gas/.. -I../../gas/../bfd -DLOC 
ALEDIR="\"/usr/local/ps3dev/spu/share/locale\""   -W -Wall -Wstrict-prototypes - 
Wmissing-prototypes -Werror -g -O2 -c ../../gas/config/obj-elf.c 
gcc -DHAVE_CONFIG_H -I. -I../../gas -I. -D_GNU_SOURCE -I. -I../../gas -I../bfd - 
I../../gas/config -I../../gas/../include -I../../gas/.. -I../../gas/../bfd -DLOC 
ALEDIR="\"/usr/local/ps3dev/spu/share/locale\""   -W -Wall -Wstrict-prototypes - 
Wmissing-prototypes -Werror -g -O2 -c ../../gas/config/atof-ieee.c 
/bin/sh ./libtool --mode=link gcc -W -Wall -Wstrict-prototypes -Wmissing-prototy 
pes -Werror -g -O2   -o as-new.exe  app.o as.o atof-generic.o cond.o depend.o dw 
arf2dbg.o dw2gencfi.o ecoff.o ehopt.o expr.o flonum-copy.o flonum-konst.o flonum 
-mult.o frags.o hash.o input-file.o input-scrub.o listing.o literal.o macro.o me 
ssages.o output-file.o read.o sb.o stabs.o subsegs.o symbols.o write.o tc-spu.o 
obj-elf.o atof-ieee.o  ../opcodes/libopcodes.la ../bfd/libbfd.la ../libiberty/li 
biberty.a 
mkdir .libs 
gcc -W -Wall -Wstrict-prototypes -Wmissing-prototypes -Werror -g -O2 -o as-new.e 
xe app.o as.o atof-generic.o cond.o depend.o dwarf2dbg.o dw2gencfi.o ecoff.o eho 
pt.o expr.o flonum-copy.o flonum-konst.o flonum-mult.o frags.o hash.o input-file 
.o input-scrub.o listing.o literal.o macro.o messages.o output-file.o read.o sb. 
o stabs.o subsegs.o symbols.o write.o tc-spu.o obj-elf.o atof-ieee.o  ../opcodes 
/.libs/libopcodes.a ../bfd/.libs/libbfd.a ../libiberty/libiberty.a 
make&#91;4&#93;&#58; Leaving directory `/home/kevin/ps3toolchain/build/binutils-2.17.50/buil 
d-spu/gas' 
make&#91;3&#93;&#58; Leaving directory `/home/kevin/ps3toolchain/build/binutils-2.17.50/buil 
d-spu/gas' 
make&#91;2&#93;&#58; Leaving directory `/home/kevin/ps3toolchain/build/binutils-2.17.50/buil 
d-spu/gas' 
make&#91;1&#93;&#58; Leaving directory `/home/kevin/ps3toolchain/build/binutils-2.17.50/buil 
d-spu' 
make&#58; *** &#91;all&#93; Error 2 
../scripts/005-binutils-2.17.50-spu.sh&#58; Failed.

hallo007 · Post by **hallo007** » Thu Jun 21, 2007 2:38 am

and there IS ALREADY TOLD for 3 times how to fix it

Post by **ooPo** » Thu Jun 21, 2007 3:27 am

hallo007 wrote:-delete -werror

Try adding '--disable-werror' to the configure line for gcc in that script. Let me know how it turns out.

hallo007 wrote:-run the scripts in ps3toolchain/scripts , one by one

If you grab the latest version from subversion, you can use something like './toolchain.sh 1 2 3 4 5' to specify which steps you want to run.

hallo007 · Post by **hallo007** » Thu Jun 21, 2007 3:39 am

toolchain is running , i added it

still running , but i am running it at 666Mhz , on my old laptop , because , i need the computer for other things right now;)

Jim · Post by **Jim** » Thu Jun 21, 2007 8:05 am

I fixed it:):):) you get this error when you dont have cygwin1.dll in windows/system32 , so copy usr/bin/cygwin1.dll to the system32 folder

Who wants to do that? Better to add usr/bin to your Windows path.

Jim

kid101skater · Post by **kid101skater** » Thu Jun 21, 2007 8:25 am

im srry im just really confused on how im supposed to fix it...

i got the cygwin thing setup with ur code and everything. what else...
explain in detail.. im sure others will have this problem

Edit : i tried them in ps3toolchain/scripts indevidually and i get the error in 005... still same error... so whats ur solution?

hallo007 · Post by **hallo007** » Thu Jun 21, 2007 10:23 pm

ooPo wrote:
hallo007 wrote:-delete -werror
Try adding '--disable-werror' to the configure line for gcc in that script. Let me know how it turns out.

hallo007 wrote:-run the scripts in ps3toolchain/scripts , one by one
If you grab the latest version from subversion, you can use something like './toolchain.sh 1 2 3 4 5' to specify which steps you want to run.

It worked , i got now some errors with the newlib , but i am already fixing it;)

again with this
prefix = /usr/local/ps3dev/spu
prefix = usr/local/ps3dev/spu

mayby make some script that it auto change?

kid101skater · Post by **kid101skater** » Fri Jun 22, 2007 5:07 am

hallo007 wrote:
ooPo wrote:
hallo007 wrote:-delete -werror
Try adding '--disable-werror' to the configure line for gcc in that script. Let me know how it turns out.

hallo007 wrote:-run the scripts in ps3toolchain/scripts , one by one
If you grab the latest version from subversion, you can use something like './toolchain.sh 1 2 3 4 5' to specify which steps you want to run.
It worked , i got now some errors with the newlib , but i am already fixing it;)

again with this
prefix = /usr/local/ps3dev/spu
prefix = usr/local/ps3dev/spu

mayby make some script that it auto change?

where is the the file for the spu one?

mukumuku · Post by **mukumuku** » Fri Jun 22, 2007 9:19 am

Any assumptions what causes this error when i run toolchain.sh? :
./toolchain.sh: line 17: ../depends/check-autoconf.sh: Permission denied
../depends/check-autoconf.sh: Failed.

I installed the latest autoconf version because i thought that was the problem but doesn't seem to help. I am on slackware 11. I can't figure out why it doesn't let me install the toolchain.

Post by **ooPo** » Fri Jun 22, 2007 9:44 am

mukumuku:

Take a look in depends/check-autoconf.sh to see what commands it is trying to run. Perhaps you can track down the problem.

jimparis · Post by **jimparis** » Fri Jun 22, 2007 11:06 am

mukumuku wrote:Any assumptions what causes this error when i run toolchain.sh? :
./toolchain.sh: line 17: ../depends/check-autoconf.sh: Permission denied
../depends/check-autoconf.sh: Failed.

The scripts in the depends/ and builds/ directory should be executable, and yours aren't. This may be because you checked out the files with something like tortoiseSVN and the executable bit wasn't set properly for cygwin.

Something like chmod +x depends/*.sh build/*.sh should fix it. Oopo, maybe "sh $SCRIPT" rather than "$SCRIPT" in toolchain.sh?

Post by **ooPo** » Fri Jun 22, 2007 2:01 pm

jimparis wrote:Oopo, maybe "sh $SCRIPT" rather than "$SCRIPT" in toolchain.sh?

That's not a bad idea.

dot_blank · Post by **dot_blank** » Fri Jun 22, 2007 2:17 pm

what if one does not have (sh) installed

jimparis · Post by **jimparis** » Fri Jun 22, 2007 4:23 pm

Then the scripts won't run anyway, since they start with "#!/bin/sh".

mukumuku · Post by **mukumuku** » Sat Jun 23, 2007 1:58 am

Ok thanks. I installed it! But, what am I supposed to do now? Is there any kind of documentation to start with? The files are located under /usr/local/ps3dev, right?

kid101skater · Post by **kid101skater** » Sat Jun 23, 2007 6:11 am

ok now what bout my prob with the spu? wheres the one file to change

Code: Select all


prefix = /usr/local/ps3dev/spu 
to
prefix = usr/local/ps3dev/spu

or w/e the code it

hallo007 · Post by **hallo007** » Sat Jun 23, 2007 9:39 pm

kid101skater wrote:ok now what bout my prob with the spu? wheres the one file to change
Code: Select all
prefix = /usr/local/ps3dev/spu 
to
prefix = usr/local/ps3dev/spu 
or w/e the code it

...........

Look to the makefile in the directory where the error happens

kid101skater · Post by **kid101skater** » Sun Jun 24, 2007 1:31 am

hallo007 wrote:
kid101skater wrote:ok now what bout my prob with the spu? wheres the one file to change
Code: Select all
prefix = /usr/local/ps3dev/spu 
to
prefix = usr/local/ps3dev/spu 
or w/e the code it
...........

Look to the makefile in the directory where the error happens

Thank you. but i still cant get it to work :(

so im gunna try not doing so on cygwin and try on my other pc on linux

kid101skater · Post by **kid101skater** » Sun Jun 24, 2007 9:59 am

So... i downloaded ubuntu 7.04 and did alot of

Code: Select all

sudo get-apt install

and have not gotten the same errors. so i believe that its just a thing with cygwin.

hallo007 · Post by **hallo007** » Mon Jun 25, 2007 7:26 pm

Installed and made already a simpel hello world

would nice to see the debug.c and fb.c and time.c being integrated in the next release , and also support for threads would be nice

current thread error

Code: Select all

In file included from /usr/local/ps3dev/ppu/lib/gcc/ppu/4.2.0/../../../../ppu/include/unistd.h&#58;4,
                 from /usr/local/ps3dev/ppu/lib/gcc/ppu/4.2.0/../../../../ppu/include/pthread.h&#58;28,
                 from demo.c&#58;3&#58;
/usr/local/ps3dev/ppu/lib/gcc/ppu/4.2.0/../../../../ppu/include/sys/unistd.h&#58;144&#58; error&#58; conflicting types for 'sleep'
proto.h&#58;11&#58; error&#58; previous declaration of 'sleep' was here

kid101skater · Post by **kid101skater** » Mon Jun 25, 2007 8:15 pm

if i figure out this error i can compile on ubuntu on pc

Code: Select all

objcopy -O binary demo.elf demo.bin
objcopy&#58; Unable to recognise the format of the input file `demo.elf'
make&#58; *** &#91;demo.bin&#93; Error 1

ldesnogu · Post by **ldesnogu** » Mon Jun 25, 2007 8:29 pm

kid101skater wrote:if i figure out this error i can compile on ubuntu on pc
Code: Select all
objcopy -O binary demo.elf demo.bin
objcopy&#58; Unable to recognise the format of the input file `demo.elf'
make&#58; *** &#91;demo.bin&#93; Error 1

You are probably using the wrong objcopy, namely the one of your PC.
You want the objcopy for the PPU, whatever its name and path are with ooPo package :)

dot_blank · Post by **dot_blank** » Mon Jun 25, 2007 10:02 pm

/usr/local/ps3dev/ppu/bin
and
/usr/local/ps3dev/spu/bin

kid101skater · Post by **kid101skater** » Tue Jun 26, 2007 10:03 am

dot_blank wrote:/usr/local/ps3dev/ppu/bin
and
/usr/local/ps3dev/spu/bin

ok and exactly where would i do this in....

etc/Profile?

whats the full code to add

Post by **ooPo** » Tue Jun 26, 2007 10:43 am

Open the makefile. Change 'objcopy' into 'ppu-objcopy' Save the makefile.

You're really off to a potentially rocky start if you need your hand held on this.

kid101skater · Post by **kid101skater** » Tue Jun 26, 2007 1:47 pm

ooPo wrote:Open the makefile. Change 'objcopy' into 'ppu-objcopy' Save the makefile.

You're really off to a potentially rocky start if you need your hand held on this.

haha... just wait :)

hallo007 · Post by **hallo007** » Wed Jun 27, 2007 8:22 pm

Anyone already have some progress to get info from the hardware???

i hope someone get access from the hdd soon:)

jimparis · Post by **jimparis** » Thu Jun 28, 2007 6:50 am

Not sure what you mean. From the otheros loader, we already have access to lots of the hardware, and access to the "other os" hdd partition. The hypervisor won't give us access to the full disk, and from otheros there's nothing we can do to change that.

hallo007 · Post by **hallo007** » Thu Jun 28, 2007 7:25 pm

Yeah but what are the commands?

jimparis · Post by **jimparis** » Fri Jun 29, 2007 12:36 am

What "commands"? The hypervisor calls? A documentation project is underway at http://wiki.ps2dev.org/ps3:hypervisor, or you can just go look at the Linux drivers.